STUART MELTING POINT SMP 10
Adalah Alat Laboratorium Umum untuk mengetahui titik leleh suatu bahan
Digital selection & display of temperature
Choice of accuracy, 1 or 0.1 degree resolution
Easy to operate with plateau facility
Ideal for educational use
Supplied with calibration certificate
The SMP10 and SMP20 have been designed with safety and ease of operation in mind making it ideal for use in education. The temperature is selected, measured and displayed digitally making it accurate and negating the need for a thermometer. The SMP10 displays temperature to 1 degree resolution while the more advanced SMP20 has a 0.1 degree resolution as well as a variable ramp rate and hold key so that the exact melt temperature can be recorded.
Two samples can be tested simultaneously. They are viewed via a magnifying lens with clear observation aided by built in illumination. Extendible back feet allow the unit to be operated at the optimum viewing angle. Full access to the block aids cleaning. The simple to follow instructions are printed directly on the instrument in most European languages for ease of use.
To operate simply select a plateau temperature via the digital display and press "start". The unit quickly heats up and remains at the selected plateau temperature until the user is ready to start the test. Insert the sample tubes and press "start". The unit then heats at a fixed rate of 2°C per minute for the SMP10 and at a user selected rate of between 1 and 10°C per minute for the SMP20. When the sample is seen to melt, note the temperature on the display. Press "stop" to end heating and cool the block.
Supplied complete with calibration certificate showing individual serial number for traceability.
Model SMP10 SMP20
Number of samples 2
Temperature range Ambient to 300ºC Ambient to 300ºC
Temperature accuracy ± 1.0ºC at 20ºC, ± 2.5ºC at 300ºC ± 1.0ºC at 20ºC, ± 2.5ºC at 300ºC
Display Three digit LED Four digit LED
Display resolution 1ºC 0.1ºC
Display hold facility No Yes
Ramp rates 20ºC per minute to plateau, 2ºC per minute to melt 20ºC per minute to plateau, variable between 1 and 10ºC per minute to melt
Dimensions (w x d x h) 160 x 220 x 170mm 160 x 220 x 170mm
Net weight 1.8 Kg 1.8 Kg
Electrical supply 230V, 50Hz, 75W 230V, 50Hz, 75W
Melting point tubes
Made from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm.
Model Description
SMP10 Melting point apparatus, 1ºC resolution, complete with pack of 100 melting point tubes, closed at one end
SMP20 Melting point apparatus, 0.1ºC resolution, complete with pack of 100 melting point tubes, closed at one end
SMP10/ 1 Glass melting tubes, closed at one end, pack of 100
SMP2/ 1 Glass melting tubes, closed at both ends, pack of 100
SMP1/ 4 Glass melting tubes, open at both ends, pack of 100